Job Description, Daily Responsibilities, and Work Life
Manufacturing Stone Cutters And Carvers
Manufacturing Stone Cutters And Carvers cut or carve stone according to diagrams and patterns.
Table of Contents
Job Description
Manufacturing Stone Cutters and Carvers cut or carve stone according to diagrams and patterns. They also verify depths and dimensions of cuts or carvings to ensure adherence to specifications, blueprints, or models, using measuring instruments.
Other tasks include:
- Move fingers over surfaces of carvings to ensure smoothness of finish.
- Study artistic objects or graphic materials, such as models, sketches, or blueprints, to plan carving or cutting techniques.
- Shape, trim, or touch up roughed-out designs with appropriate tools to finish carvings.
- Lay out designs or dimensions from sketches or blueprints on stone surfaces, by freehand or by transferring them from tracing paper, using scribes or chalk and measuring instruments.
- Carve designs or figures in full or bas relief on stone, employing knowledge of stone carving techniques and sense of artistry to produce carvings consistent with designers’ plans.
- Cut, shape, and finish rough blocks of building or monumental stone, according to diagrams or patterns.
We asked Manufacturing Stone Cutters and Carvers how satisfied they are with their job. Here is what they said.
61%
46%
61% of them said they were satisfied with their job and 46% said they find that their job makes the world a better place or helps to make someone else’s life better.
Typical Day At Work
On a daily basis, Manufacturing Stone Cutters and Carvers select chisels, pneumatic or surfacing tools, or sandblasting nozzles and determine sequence of use. They verify depths and dimensions of cuts or carvings to ensure adherence to specifications, blueprints, or models, using measuring instruments.
A typical day for a Manufacturing Stone Cutter and Carver will also include:
- Cut, shape, and finish rough blocks of building or monumental stone, according to diagrams or patterns.
- Carve designs or figures in full or bas relief on stone, employing knowledge of stone carving techniques and sense of artistry to produce carvings consistent with designers’ plans.
- Smooth surfaces of carvings, using rubbing stones.
- Shape, trim, or touch up roughed-out designs with appropriate tools to finish carvings.
- Lay out designs or dimensions from sketches or blueprints on stone surfaces, by freehand or by transferring them from tracing paper, using scribes or chalk and measuring instruments.
We asked some Manufacturing Stone Cutters and Carvers a few questions to find out what else does their work day look like. Here is what we found.
Do you have telephone conversations everyday in this job? | 27% said yes | |
How important is it to work in a team in this job? | 36% said very important | |
Do you have group discussions everyday in this job? | 58% said yes | |
Do you talk or work with customers everyday in this job? | 9% said yes | |
Do you have to deal with angry customers everyday in this job? | 5% said yes | |
Do you have to make decisions everyday in this job? | 30% said yes |
Other responsibilities
Besides their typical day, Manufacturing Stone Cutters and Carvers also copy drawings on rough clay or plaster models. They may also guide nozzles over stone, following stencil outlines, or chip along marks to create designs or to work surfaces down to specified finishes.
On a weekly to monthly basis, Manufacturing Stone Cutters and Carvers Load sandblasting equipment with abrasives, attach nozzles to hoses, and turn valves to admit compressed air and activate jets. They might also Remove or add stencils during blasting to create differing cut depths, intricate designs, or rough, pitted finishes.
In addition, they Drill holes and cut or carve moldings and grooves in stone, according to diagrams and patterns.
Although specific duties may vary, many of them Smooth surfaces of carvings, using rubbing stones.
To some Manufacturing Stone Cutters and Carvers, it is also their responsibility to Study artistic objects or graphic materials, such as models, sketches, or blueprints, to plan carving or cutting techniques.
Working life
Standard 40 hour work week
Regular schedule like a 9 to 5
In a typical work week as a Manufacturing Stone Cutter and Carver, you can expect to work 40 hour work week.
Is this right for me
The Builders and The Artists
People who are suitable for this job tends to like work activities that include practical, hands-on problems and solutions. They like working with plants, animals, and real-world materials like wood, tools, and machinery..
They also like working with forms, designs and patterns. They often require self-expression and the work can be done without following a clear set of rules.
You can read more about these career personality types here.
Learn more about Manufacturing Stone Cutters And Carvers
Summary | |
Job Description (You are here) | |
Salary | |
Requirements | |
Quiz |
Related to Manufacturing Stone Cutters and Carvers Job Description
Manufacturing Stone Cutters and Carvers job description, what do Manufacturing Stone Cutters and Carvers do, typical day for Manufacturing Stone Cutters and Carvers, what is it like to work as a Manufacturing Stone Cutter and Carver, how many hours do Manufacturing Stone Cutters and Carvers work, day to day work of a Manufacturing Stone Cutter and Carver